How to Repair a PVC Air Hose Connector?
Exposure to the elements, regular use, and accidental damage can cause a leaking PVC air hose. This wastes water and may cause a loss of pressure that makes it difficult to use nozzles and sprinkler attachments. Fortunately, hose repairs are simple and easy to carry out when one has the required equipment. A PVC air hose can leak in several places, including from the PVC air hose.connector and from a hole or tear in the body. Learn what equipment a user requires, and what techniques he or she can use to deal with each type of leak.
If the leak is at a hose connector, an individual should replace the gasket within the connector with an o-ring as this creates a superior seal. If this doesn’t solve the matter, he or she may have to exchange the PVC air hose. End by following several steps.
- First, establish whether the hose end takes a male or female fitting, and measure the diameter of the hose. Use this information to shop for the acceptable hose end replacement kit, which should include a hose barb and a hose clamp.
- Next, cut the prevailing hose end off using garden shears, a box cutter, or a pointy knife. Then, place the clamp on the hose. Immediately then, insert the hose barb, using oil or dishwasher detergent to lubricate the fitting if needed.
- Finally, once the barb is in situ, secure it by sliding the clamp to the center of the barb and tightening it with a screwdriver. A hose-end repair kit usually comes with instructions. Always follow these to make sure that specific products perform needless to say.
